System Quality

Home » Products » System Quality

ZephIR is CE Marked, has been audited and found to meet the requirements of standard ISO 9001:2008 Quality Management System (UK), and conforms to all BS / EU safety and associated regulations. Each and every wind analysis system is validated at the IEC compliant UK Remote Sensing Test Site in accordance to an industry-accepted process.

Download ISO Certificate here

Test listRef StandardNotesTest location
Lidar Performance Evaluation Test at SiteEC 61400-12-1
(Power Performance Measurements of Wind Turbine)
Completed on test site accredited to IEC 61400-12-1 by technical and engineering services provider GL Garrad Hassan.UK Remote Sensing Test Site, UK
- Freeze Test
- Ability to withstand ice build-up
- Ability to de-ice when start up
Tested to BS EN 60068-2-1 Test ATesting to BS EN 60068-2-1 Test A to minus 40°CTRaC, UK
EMC Test
o RF Emission, EN 61000-6-4
o RF Immunity, EN 61000-4-3
o Conducted Immunity,
o Burst, EN 61000-4-4
o Surge, EN 61000-4-5
o Electrostatic Discharge (ESD)
o Voltage dips and short interruptions,
o Radiated electromagnetic emissions,
o Conducted electromagnetic emissions,
o Mains Harmonics
o Voltage Fluctuations and Flicker
EN 61000-6-4
EN 61000-4-3
EN 61000-4-6:1996+A1:2001
EN 61000-4-4
EN 61000-4-5:1995+A1:2001
EN 61000-4-2:1995+A1:1998+
A2:2001
EN 61000-4-11:1994
EN 55011:2007 + A2:2007
EN 55011:2007 + A2:2007
EN 61000-3-2:2000
EN 61000-3-3:1995 +A1:2001
TRaC Report: TES002888-00-1 TRaC, UK
Laser product classification to
IEC/EN 60825-1;
IEC/EN 60825-1Completed review including eye safety checklistLaserMet, UK
Ingress protection test for resistance to water and object penetration
o Dust (IEC 60529)
o Blowing water (IEC 60529)
EN 60629, IP 67 ( IP 20, IP 54)
IEC 60529
- TRaC, UK
High & Low Temperature Test
o Low temperature test
o High temperature test
Low temperature is at – 40°C
High temperature is at +50°C
Completed to BS EN 60068-2-1 Test A and BS EN 60068-2-2 Test B providing -40°C to +50°CTRaC, UK
Vibration Test
o Sinusoidal vibrations
o Random vibrations
EN 300 019-2-2 V2.1.2
EN 300 019-2-2 V2.1.2
Tested in accordance with ETSI EN 300 019-2-2 V2.1.2 (1999-09) Careful Transportation

Vibration: Severity: 1.0 m2/s3 from 5 to 20Hz (Vertical Axis), 0.1 m2/s3 (Horizontal Axes) -3dB/Octave from 20 to 200Hz
Duration: 30 minutes in each of 3 axes

Bump: Severity: 50m/s2 11ms half sine
Number of Bumps: 100 in each direction of the vertical axis only.
TRaC, UK
Mechanical Shock TestIEC 60068-2-27Included in Vibration / BumpTRaC, UK
Eye-safety Test
Eye safe – 1 verification test
-Eye-safety Test
Eye safe – 1 verification test
LaserMet, UK
Safety compliance verificationCompliance with EN61010-1:2001-TRaC, UK
Cables and PCB test Assembled to IPC/WHMA-A-620A (requirements and acceptance for cable and wire harness assemblies). Assembly of PCBs to IPC -A-610D (acceptability of electronic assemblies standard)-Suppliers
Every component to PCB level must comply with the low voltage directive, flammability ratings and RoHS compliance.-All CoC's available as required - all RoHS compliant.TRaC, UK
Sea salt spray TestIEC/EN 60068-2-52Part 2-52: Tests - Test Kb: Salt mist, cyclic(sodium chloride solution)TRaC, UK

Make an enquiry today

 

Make an enquiry today