News and Events

Floating Lidar company EOLOS to deploy with ZephIR in Baltic Sea

November 29, 2017

Turn-key offshore wind measurement company confirms deployment with one of the biggest energy Utilities in Poland. EOLOS FLS200 commissioned at Baltic Sea Offshore Wind Farm.         In a competitive tender EOLOS secured contracts to deploy the EOLOS FLS200 floating Lidar, purpose designed for the offshore industry incorporating the leading ZephIR 300M wind…

Read more

 


 

Wind farm offshore substations get Lidar upgrade

November 28, 2017

Announced at WindEurope 2017 – Leading Lidar provider, ZephIR Lidar, has released details of a new meteorological standard for offshore substations within operational offshore wind farms. Substations can now be delivered with a ZephIR 300M wind lidar as part of a Meteorological Monitoring Module to provide remote wind measurements from the system’s installed location up to…

Read more

 


 

Wind farm operator SSE Generation opts for wind Lidar, permanently

November 15, 2017

Leading UK utility company swaps Permanent Met Masts for Permanent Met ZephIRs at 108MW onshore Bhlaraidh Wind Farm in Scotland to deliver SCADA-integrated accurate wind farm measurements remotely, from the ground. With almost 1GW of onshore wind plant, SSE continues to focus on the development, construction and commissioning of onshore and offshore wind farm capacity…

Read more

 


 

Smartec sends ZephIR Lidar in to the Taipei Basin with the National Taiwan University

September 13, 2017

Smartec Scientific Corp (Smartec) has confirmed their support of the Department of Atmospheric Sciences, National Taiwan University (NTU) by deploying a ZephIR 300 wind lidar in the Taipei Basin as part of a cutting-edge wind and weather research program described as being of “national importance”.                   Since…

Read more

 


 

ZephIR Lidar expands Engineering Team following establishment of new UK Lidar Production Centre

August 17, 2017

ZephIR Lidar, a leading wind lidar manufacturer, has announced the expansion of its Engineering and Supply Chain Team as part of a larger strategy to increase production and meet the growing demand for more accurate wind measurements within the wind energy industry. ZephIR Lidar has invested its own resources and has also applied for and…

Read more

 


 

DNV GL verifies nacelle-mounted ZephIR Lidar wind measurements

July 25, 2017

New nacelle Lidar test site fully operational An independent performance verification of a nacelle-mounted ZephIR Lidar has been undertaken by DNV GL on the test site in Janneby, Germany which demonstrates the product is compliant with best-practice guidelines developed in the EUDP UniTTe programmes – widely regarded and accepted as industry benchmarks for installations of…

Read more

 


 

Largest dedicated Wind Lidar Production Centre in Europe established, with global outreach

July 7, 2017

ZephIR Lidar, wind lidar manufacturer, has confirmed that the UK Wind Lidar Production Centre will officially open by the end of 2017, in response to the increasing demand for more accurate wind measurements in the development, construction and operation of wind farms worldwide. Inside the Wind Lidar Production Facility – ZephIR Lidar    The Centre…

Read more

 


 

REG Power Management Lifting Construction Safety Standards with Lidar

June 15, 2017

REG Power Management (RPM) is deploying ZephIR Lidar systems to achieve the highest levels of safety within their wind farm constructions projects.

Read more

 


 

Hundreds gather at launch of powerful ‘CFD + Lidar’ combination for more effective wind measurements in complex terrain

April 11, 2017

  Existing Meteodyn WT users, in addition to any ZephIR Lidar user, can access the white box solution either directly in Meteodyn WT or via the web link: http://meteodyn.com/en/lidar-data-post-conversion/#.WNo9glUrLBR The results from the 18-month study have been published in a white paper available on request: email research@zephirlidar.com The launch of the results and service were…

Read more

 


 

New IEC standard sees acceptance for wind lidars in wind turbine power curve testing

March 14, 2017

The international standards and conformity assessment body for all fields of electrotechnology, the International Electrotechnical Commission (IEC), has published a new standard to deliver the technical basis for the acceptance of lidar measurements for wind turbine power performance testing and wind resource assessments. The release of the new standard, IEC 61400-12-1:2017, is considered a major…

Read more

 


 

  • Recent Posts

  • Archives

  • Make an enquiry today